| 04-Jan-2016 | S | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on January 04, 2016, inter alia,
1. The Board considered sub-division of equity shares subject to approval of members at general meeting and in compliance with applicable provisions of the Companies Act, 2013.
SUB. :- Sub Division of equity shares of Mold-Tek Technologies Limited (Scrip Code 526263)
Trading Members of the Exchange are hereby informed that, Mold-Tek Technologies Ltd. has fixed the Record Date for the purpose of sub division of equity shares of the company.
DEMATERIALISED SECURITIES - ROLLING SETTLEMENT SEGMENT
COMPANY NAME & CODE
Mold-Tek Technologies Ltd.
(526263)
RECORD DATE
18/02/2016
PURPOSE
Sub Division of existing equity shares from every ONE equity share of Rs.10/- each into FIVE equity shares of Rs.2/- each.
SUB-DIVIDED PAID-UP VALUE
Rs.2/-
SUB-DIVIDED PAID-UP VALUE W.E.F.
17/02/2016 DR-221/2015- 2016
Note:-
i. Trading members are hereby informed that the transactions in the equity shares (physical) of the aforesaid company in the Exit-Route Scheme will be for Rs. 2/- paid up w.e.f. 17/02/2016.
ii. ISIN No. INE835B01027 of Rs.10/- paid up will not be valid for transactions done on the Exchange on or after 17/02/2016.
iii. The new ISIN Number for Rs.2/- paid up will be informed to the market by a separate notice.
(As Per BSE Notice Dated on 05.02.2016) | 18-Feb-2016 | |
| 03-Apr-2024 | D | In the Board Meeting held today, the Board has approved an Interim Dividend of Rs. 2.00/-(100%) per equity share on face value of Rs. 2.00/- per equity share. | 12-Apr-2024 | |
| 02-May-2023 | D | Outcome of the Board Meeting held on 2nd May, 2023
Recommendation of Final Dividend on the Equity Shares of the Company for the financial year 2022-23 at the rate of Rs. 1.40/- per Equity Share of the face value of Rs. 2/- each. The dividend, if approved by the members of the Company at the ensuing Annual General Meeting (''AGM''), will be paid within 30 days from the date of AGM. | 18-Sep-2023 | |
| 12-Apr-2023 | D | This is to inform you that the Board of Directors ('Board') of the Company at its meeting held today i.e. 12th April, 2023, have, inter-alia, declared an Interim Equity Dividend for the Financial Year 2022-23 @ 100% i.e. ? 2.00/- per equity share on face value of ? 2.00/- per equity share. | 21-Apr-2023 | |
| 09-May-2022 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on May 09, 2022, inter alia, has recommended a final dividend of Rs. 0.30/- per Equity Share (15%) for the financial year ended March 31, 2022 on Equity Shares, on face value of Rs. 2/- each. The Board of Directors has earlier declared an interim dividend of Rs. 1.70/- per Equity Share (85%), on face value of Rs. 2/- each at its meeting held on March 15, 2022. The total dividend for the year ended March 31, 2022, amounts to Rs. 2/- per Equity Share (100%), on face value of Rs. 2/- each against 70% i.e., Rs. 1.40/- per share for the previous year 2020-21. | 22-Sep-2022 | |
| 15-Mar-2022 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on March 15, 2022, inter alia, has approved, an Interim Dividend for the financial year 2021-22, @ 85% i.e.. Rs. 1.70/- per equity share on face value of Rs. 2/- per share as against @ 30% i.e. Rs. 0.60/- per equity share as interim dividend issued for the FY 20-21.
The Interim Dividend declared shall be paid on or from March 28, 2022 to April 11, 2022. | 23-Mar-2022 | |
| 07-Jun-2021 | D | Outcome of Board Meeting dated 7th June, 2021
Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on June 07, 2021, inter alia, has recommended a final dividend of Rs. 0.80/- per Equity Share (40%) for the financial year ended March 31, 2021 on Equity Shares, on face value of Rs. 2/- each. The Board of Directors has earlier declared an interim dividend of Rs. 0.60/- per Equity Share (30%), on face value of Rs. 2/- each at its meeting held on March 08, 2021. The total dividend for the year ended March 31, 2021, amounts to Rs. 1.40/- per Equity Share (70%), on face value of Rs. 2/- cach against 75% i.e., Rs. 1.50/- per share for the previous year 2019-20. | 22-Sep-2021 | |
| 08-Mar-2021 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on March 08, 2021, inter alia, have declared an Interim Dividend for the financial year 2020·21, @30 % i.e, Rs. 0.60/- per equity share on face value of Rs. 2/- per share. | 16-Mar-2021 | |
| 11-Mar-2020 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on March 11, 2020, inter alia, have declared an Interim Dividend for the Financial Year 2019-20, @ 75% i.e., Rs. 1.50/- per equity share on face value of Rs. 2/- per share.
The Interim Dividend declares shall be paid on or before March 27, 2020 to April 09, 2020. | 19-Mar-2020 | |
| 02-May-2019 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors at its meeting held on May 02, 2019, inter alia, have recommended a final dividend of Rs. 0.60 per Equity Share for the financial year ended March 31, 2019 on Equity Shares, on face value of Rs. 2/- each. The Board of Directors has earlier declared an interim dividend of Rs. 0.80 paise per Equity Share, on face value of Rs. 2/ - each (40%) at its meeting held on April 12, 2019. The total dividend for the year ended March 31, 2019, amounts to Rs. 1.40 paise per Equity Share (70%), on face value of Rs. 2/- each against 35% i.e. Rs. 0.70 per share for the previous year 2017-18.
The final dividend is subject to the approval of shareholders at the ensuing Annual General Meeting.
| 20-Sep-2019 | |
| 12-Apr-2019 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on April 12, 2019, have declared an Interim Dividend for the Financial Year 2018-19, @ 40% i.e., Rs. 0.80 ps/- per equity share on face value of Rs. 2/- per share. (In Previous Year 2017-18, Interim Dividend given was Rs. 0.30 ps i.e. 15% per equity share on face value of Rs. 2/- per share).
The Interim Dividend declared shall be paid on or from April 26, 2019 to May 10, 2019. | 23-Apr-2019 | |
| 28-May-2018 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on May 29, 2018, inter alia, have recommended a final dividend of Rs. 0.40 per Equity Share (20%) for the financial year ended March 31, 2018 on Equity Shares, on face value of Rs. 2/ - each. | 19-Sep-2018 | |
| 14-May-2018 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors at its Meeting held on May 14, 2018, inter alia, have declared an Interim Dividend for the financial year 2017-18, @15% i.e. Rs.0.30 ps/- per equity share on face value of Rs. 2/- per share. | 21-May-2018 | |
| 30-May-2017 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on May 30, 2017, inter alia, has recommended a final dividend of 0.30 Paisa per Equity Share (15%) for the financial year ended March 31, 2017 on Equity Shares, on face value of Rs. 2/- each. The Board of Directors has earlier declared an interim dividend of 0.30 Paisa per Equity Share, on face value of Rs. 2/- each (15%) at its meeting held on April 19, 2017. The total dividend for the year ended March 31, 2017, amounts to 0.60 Paisa per Equity Share (30%), on face value of Rs 2/- each against 40% i.e. 0.80 Paisa per share for the previous year 2015-16.
The final dividend is subject to the approval of shareholders at the ensuing Annual General Meeting. | 14-Sep-2017 | |
| 19-Apr-2017 | D | The Board of Directors at its Meeting held on Wednesday, 19th April, 2017 have declared an Interim Dividend for the Financial year 2016-2017, @ 15 % i.e, 0.30 Paise per Equity Share on face value of Rs. 2/- | 27-Apr-2017 | |
| 17-May-2016 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on May 17, 2016, inter alia, has recommended a final Dividend @ 10% i.e., Rs. 0.20/-ps per Equity Share of face value of Rs. 2/- each for the financial year ended March 31, 2016. The Board of Directors has earlier declared an interim dividend @ 30% of i.e., Rs. 0.60/-ps per Equity Share of face value of Rs. 2/- each at its meeting held on March 10, 2016. The total Dividend for the year ended March 31, 2016 amounts to Rs. 0.80/-ps per Equity Share of face value of Rs 2/- each (40%).
The final dividend is subject to the approval of shareholders at the ensuing Annual General Meeting. | 09-Sep-2016 | |
| 10-Mar-2016 | D | Mold-Tek Technologies Ltd has informed BSE that the Mold-Tek Group has entered into 30th year of operations. In celebrations of the same, Board of Directors have decided to pay additional dividend to its shareholders.
Further, the Board of Directors at its Meeting held on March 10, 2016, have declared an Interim Dividend for the financial year 2015-16, @ 30% (inclusive of 10% onetime - 30th year additional dividend) i.e. Rs. 0.60/- ps per equity share on face value of Rs. 2/-.
The Interim Dividend declared shall be paid on or from March 22, 2016 to April 09, 2016. | 18-Mar-2016 | |
| 10-Mar-2016 | D | Mold-Tek Technologies Ltd has informed BSE that the Mold-Tek Group has entered into 30th year of operations. In celebrations of the same, Board of Directors have decided to pay additional dividend to its shareholders.
Further, the Board of Directors at its Meeting held on March 10, 2016, have declared an Interim Dividend for the financial year 2015-16, @ 30% (inclusive of 10% onetime - 30th year additional dividend) i.e. Rs. 0.60/- ps per equity share on face value of Rs. 2/-.
The Interim Dividend declared shall be paid on or from March 22, 2016 to April 09, 2016. | 18-Mar-2016 | |
| 19-May-2015 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on May 19, 2015, inter alia, has recommended Final Dividend of Rs.1.50/- Per Equity Share (15%) for the financial year ended March 31, 2015, on Equity Shares of Rs. 10/- each. The Board of Directors have earlier declared an Interim Dividend of Rs.2.00/- per Equity Share (20%) at its meeting held on April 15, 2015. The total dividend for the year ended March 31, 2015 amounts to Rs. 1,73,81,696/- (Rs.3.50/-per Equity Share i.e.,35%) and the total Dividend Tax is Rs. 34,75,318/-. The Final Dividend is subject to the approval of Shareholders at the forthcoming Annual General Meeting. | 18-Sep-2015 | |
| 15-Apr-2015 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on April 15, 2015, inter alia, has declared an Interim Dividend for the financial year ended March 31, 2015 @ Rs. 2/-per Share. (i.e 20%),
The Interim Dividend declared shall be paid on or before May 12, 2015. | 21-Apr-2015 | |
| 29-May-2014 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on May 29, 2014, inter alia, has recommended Final Dividend of Re. 0.80 ps. Per Equity Share (8%) for the financial year ended March 31, 2014, on Equity Shares of Rs. 10/- each. The Board of Directors have earlier declared an Interim Dividend of Re. 1.00/- per Equity Share (10%) at its Meeting held on February 10, 2014. The total dividend for the year ended March 31, 2014 amounts to Rs. 84,47,671/- (Rs. 1.80 ps. per Equity Share i.e.,18%) and the total Dividend Tax is Rs. 14,35,682/- The Final Dividend is subject to the approval of Shareholders at the forthcoming Annual General Meeting. | 24-Sep-2014 | |
| 10-Feb-2014 | D | Mold-Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on February 10, 2014, inter alia, have declared an Interim Dividend @ Re. 1/- per share, i.e. 10% for the financial year ended March 31, 2014.
The Interim Dividend declared shall be paid on or before March 10, 2014. | 14-Feb-2014 | |
| 30-May-2013 | D | Mold Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on May 30, 2013, inter-alia, considered the following :
1. Recommended final dividend of Rs.1.20 ps. per Equity Share (12%) for the financial year ended March 31, 2013, on Equity Shares of Rs. 10/- each. The total dividend for the year ended March 31, 2013, amounts to Rs. 56,25,967/- (Rs.1.20/- per Equity Share i.e.,12 %), and the total Dividend Tax is Rs. 9,12,673/-. The final dividend is subject to the approval of shareholders at the forthcoming Annual General Meeting. | 16-Sep-2013 | |
| 29-May-2012 | D | Mold Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on May 29, 2012, inter alia, has considered the following;
1. Recommended final dividend of Re. 1/- per Equity Share (i.e., 10%) for the financial year ended March 31, 2012, on applicable Equity Shares of Re. 10/- each, amounting to Rs. 46,88,306/- with Dividend Tax of Rs. 7,60,560/-. The final dividend is subject to the approval of shareholders. | 13-Sep-2012 | |
| 14-Jul-2011 | D | Mold Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on July 14, 2011, inter alia, recommended Dividend @ 15% (i.e. Rs. 1.50/- per Equity Share) for the year ended March 31, 2011 subject to the approval of members at the ensuing Annual General Meeting. | 12-Aug-2011 | |
| 01-Sep-2010 | D | Mold Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on September 01, 2010, inter alia, has recommended dividend @ 15% (i.e. Rs. 1.50/- per Equity Share) for the year ended March 31, 2010, subject to the approval of the members of the ensuing Annual General Meeting. | 23-Sep-2010 | |
| 30-Jun-2009 | D | Mold Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on June 30, 2009, inter alia, has recommended a final dividend of 20% i.e. Rs 2/- per share (Subject to the approval of Shareholders in the General Meeting) for the year ended March 31, 2009. | 24-Sep-2009 | |
| 14-Aug-2008 | D | Mold Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on August 14, 2008, inter alia, has considered and approved the following:
The Board recommended a dividend of 20% for approval of the members at forthcoming AGM. | 18-Sep-2008 | |
| 02-Jul-2007 | D | Mold Tek Technologies Ltd has informed BSE that the Board of Directors of the Company at its meeting held on June 30, 2007, inter alia, has recommended a final dividend of 20% (subject to approval of the shareholders in the General Meeting) based on the Audited results for the year ended March 31, 2007. | 20-Sep-2007 | |
| 15-Jun-2006 | D | 10% Dividend | 19-Sep-2006 | |
| 24-Apr-2024 | BC | MOLD-TEK TECHNOLOGIES LTD.has informed BSE that the meeting of the Board of Directors of the Company is scheduled on 30/04/2024 inter alia to consider and approve and take on record amongst other ite | 30-Apr-2024 | |
| 18-Apr-2024 | BC | Trading Members of the Exchange are hereby informed that the further new securities issued by the under mentioned companies are listed and admitted for trading on the Exchange with effect from Friday | 19-Apr-2024 | |
| 29-Mar-2024 | BC | Record date for the Interim Dividend for FY 2023-24. | 12-Apr-2024 | |
| 03-Apr-2024 | BC | 100% Interim Dividend | 12-Apr-2024 | |
| 29-Mar-2024 | BC | MOLD-TEK TECHNOLOGIES LTD.has informed BSE that the meeting of the Board of Directors of the Company is scheduled on 03/04/2024 inter alia to consider and approve a proposal for declaration of Interi | 03-Apr-2024 | |